Our stainless steel safety razors GC1.1, GC1.1S and GC2.0 are CNC-milled from solid AISI 303 stainless steel in Vorarlberg, Austria. Handle and head are not cast and not chrome-plated. All three take any standard double-edge blade. When you shave, you only replace the blade – the razor stays.
Solid stainless steel instead of chrome-plated zinc
Many low-cost safety razors are made of die-cast zinc with a chrome coating. Once the coating chips, the zinc is exposed and can corrode. A milled stainless steel razor is the same material all the way through. A scratch is just a scratch – there is no other metal underneath.
The GC1.1 in “Raw” has a bare stainless steel surface, and the GC2.0 is glass bead blasted. The black, copper and gold handles of the GC1.1 also have a hard DLC coating (diamond-like carbon). More in our comparison CNC-machined vs. die-cast zinc safety razors.
AISI 303 or 316L? An honest comparison
Some brands mill their razors from 316L, we use AISI 303. Both are chromium-nickel stainless steels. The difference:
-
AISI 303 (1.4305) contains a little sulphur. This makes it very clean to machine, so we can mill to 0.01 mm. In return, it is slightly less resistant to salt and chlorine than 316L.
-
316L (1.4404) also contains molybdenum and holds up better against salt water and chlorine. That is why it is often called “marine grade” – AISI 303 is not.
For a razor in your bathroom, AISI 303 is all you need. Tap water, soap and drying after the shave are no problem for it. If you keep your razor permanently wet, for example in a seaside shower, 316L has the edge.
Weight and handle: which model suits you
A heavy razor needs almost no pressure. Its weight guides the blade – you just hold the right angle. Our three stainless steel models weigh between 119 and 128 g. The main differences are the handle and the blade gap:
|
Stainless steel safety razor GC1.1 |
Stainless steel safety razor GC1.1S |
Stainless steel safety razor GC2.0 |
| Handle |
104 mm, long, grooved |
88 mm, short and thicker (Ø 13.8 mm), grooved |
88 mm, short (Ø 13.9 mm) |
| Weight |
119 g |
128 g |
126 g |
| Blade gap / exposure |
0.65 / 0.10 mm |
0.65 / 0.10 mm |
0.45–1.05 / 0.05–0.20 mm, depending on base plate |
| Base plate |
– |
– |
1 of your choice, 8 versions: 4 gap sizes, each with open or closed comb |
| Right for you if … |
you are new to wet shaving and want control |
you like a compact, solid grip |
you want to fine-tune your shave |
Prefer a light razor, for legs and body for example? Take a look at the aluminium safety razor ALP (around 48 g) in our safety razor collection.
Care
Rinse the razor under warm water after shaving, shake it off and let it air-dry. Once a week, unscrew the head and remove soap residue – a soft toothbrush will do. Stainless steel needs no oil.
Avoid steel wool and chlorine-based cleaners. Steel wool leaves iron particles that rust as brown spots, and chlorine attacks the surface. When travelling, a matching razor protection keeps the blade and your wash bag safe.
FAQ: stainless steel safety razors
Does a stainless steel safety razor rust?
Not with normal care – AISI 303 is stainless steel. Brown spots are almost always surface rust from foreign iron particles, for example from an old blade or steel wool. You can remove them with a stainless steel cleaner or a little citric acid. To prevent them: rinse, let dry, change the blade in time.
Which blades fit?
Any standard double-edge (DE) blade. The format has been the same for decades, so you are not tied to one brand. To get started, try our
European double edge razor blades (10 pcs). Feel free to test several brands – how sharp or smooth a blade feels is very personal.
How long does a stainless steel safety razor last?
Apart from the blade, a milled stainless steel razor has no part that wears out during shaving: no chrome plating to chip, no spring, no hinge. With normal care, you can use it for many years. For the GC2.0,
base plates are available individually in our shop, and handle and head
on request.
Which stainless steel safety razor is the mildest?
The
stainless steel safety razor GC2.0 with base plate 1: 0.45 mm blade gap, 0.05 mm exposure, closed comb. Base plates 2 to 4 make it more efficient step by step. The GC1.1 and GC1.1S, with a 0.65 mm gap, sit in the middle: efficient, yet easy to control, even for beginners.
How often should I change the blade?
Usually after 3 to 7 shaves, depending on your beard, skin and blade – at the latest when the blade starts to pull. Collect used blades in a blade bank. How to dispose of them is explained in our
zero waste guide.
Why a metal safety razor creates less waste than a cartridge razor: see our environmental comparison of safety and cartridge razors. How to shave with (almost) no waste: see our zero waste guide.