Zero Waste Safety Razor: How to Shave With (Almost) No Waste

Safety razor with a single double-edge blade next to a pile of used razor cartridges

Zero waste means “no waste”. When it comes to shaving, you can't get all the way there, but you can get very close. With a metal safety razor, only one thing is left over in everyday use: the blade, a thin piece of steel. There is no plastic head, no lubricating strip and no battery.

In this guide you'll learn what exactly is left over and where used blades belong. You'll also find out what to use instead of foam from a can, what zero waste shaving costs per year and how to switch in five steps.

What's left after a shave? Just the blade

With a cartridge razor, you throw away a cartridge every few shaves. It is made of plastic, rubber, several blades and a lubricating strip, all firmly joined together. It can't be separated, so the cartridge ends up in general waste. Our environmental comparison of safety and cartridge razors explains why.

With a safety razor, handle and head stay in use for years. Only the double-edge blade is replaced.

Safety razor Cartridge razor
What you replace only the steel blade the whole cartridge: plastic, rubber and steel
How often every 3–7 shaves every 5–10 shaves
Where it goes collected as scrap metal, where your local recycling centre accepts it general waste
Packaging blades usually in paper and cardboard often plastic blister packs

To be honest: the blade is waste too, just waste that's easy to recover. And not everything is metal: our packaging consists of cardboard and 3D-printed parts made of PLA, a plastic made from renewable raw materials. The optional razor protection and the SYM razor stand are PLA too. That's why our title says “(almost)”.

Disposing of blades: blade bank and scrap metal

Used blades are sharp. Loose in the bin, they are a risk to you and to everyone who handles the waste later. Here's how to do it properly:

  1. Use a blade bank. This is a small metal tin with a slot. An empty tin with a tight lid, labelled “razor blades”, works too.
  2. Hand in the full tin. Many municipal recycling centres accept a sealed blade bank as scrap metal. Rules differ from town to town, so check with your local waste service.
  3. Don't put blades in packaging recycling. Packaging bins are for packaging only, and blades are not packaging.
  4. If your town doesn't accept blades: put the sealed tin in general waste. Never throw away loose blades.

Soap instead of foam from a can

Shaving foam and gel from a can come with a metal can, propellant gas and a plastic cap. Once empty, the can is waste, and there is usually some product left inside.

The alternative is as old as the safety razor itself: shaving soap. It comes as a solid puck in a tin, jar or wooden bowl, and often as a refill wrapped in paper. With daily shaving, one puck often lasts several months. Shaving cream in a tube or tub is the softer option and lathers faster.

How it works: wet your brush and swirl it over the soap for 20 to 30 seconds. Then build the lather directly on your damp skin. Add a little water bit by bit to make it creamier.

Brush and care

Shaving brush: Synthetic bristles are vegan, dry quickly and are easy to care for, but they are plastic. Natural bristles, such as badger or boar, hold a lot of water. With good care, both last for many years. Rinse the brush after shaving, shake it out and let it air-dry, bristles down or upright.

Safety razor: Rinse, let dry and open the head once a week to remove soap residue. A stainless steel or aluminium razor needs no oil. More care tips on our stainless steel safety razors page.

After the shave: An alum block soothes the skin and stops small nicks, and one block lasts a very long time. Aftershave balm is also available in glass jars instead of tubes.

What does zero waste shaving cost per year?

The running costs are mainly blades. An example with our European double edge razor blades (10 pcs): 10 blades cost €3.90, i.e. €0.39 per blade (as of November 2026). With daily shaving, that means:

Blade change Blades per year Cost per year
every 7 shaves 52 approx. €20
every 5 shaves 73 approx. €28
every 3 shaves 122 approx. €48

On top of that comes shaving soap, plus a one-time brush and razor. A Greencult stainless steel razor costs between €59.90 and €105. How quickly that pays off compared with cartridges: see Why is a safety razor so much cheaper than a cartridge razor?

Switching in 5 steps

  1. Choose the right razor. For beginners, the stainless steel safety razor GC1.1 with its long handle and medium blade gap is a good start. If you like a short, thick handle, go for the stainless steel safety razor GC1.1S. The stainless steel safety razor GC2.0 can be set from mild to efficient with interchangeable base plates. Light and mild, also for legs and body: the aluminium safety razor ALP. All stainless steel models compared: stainless steel safety razors.
  2. Get blades. One pack of standard DE blades is enough to start. Later you can try other brands.
  3. Use up first, then switch. Finish the foam cans and cartridges you already have. Throwing away things that still work would be the opposite of zero waste. Once the can is empty, switch to shaving soap and a brush.
  4. Learn the technique. Hold the blade at an angle of about 30 degrees, don't press, use short strokes and shave with the grain first. After 5 to 10 shaves, it usually clicks. Step by step in our guide wet shaving for beginners.
  5. Set up your blade bank. Right next to the sink. Then no blade ends up loose in the bin.

FAQ: zero waste shaving

Is shaving with a safety razor really waste-free?
Not entirely. The steel blade and some packaging from blades and soap remain. Compared with a cartridge made of plastic, rubber and steel, that is much less, and the blade can be recovered as metal.
Where do used razor blades go?
Into a blade bank. Many municipal recycling centres accept the full, sealed tin as scrap metal. Never throw away loose blades, and don't put them in packaging recycling.
How long does a razor blade last?
Usually 3 to 7 shaves. A dense beard needs a new blade more often. Change it at the latest when it starts to pull.
Can I shave my legs and body with a safety razor?
Yes. For large areas and sensitive skin, a light and mild razor is pleasant, for example the aluminium safety razor ALP, around 48 g with a 0.55 mm blade gap.
Do I really need a brush?
No. You can also lather shaving cream with your hands. A brush gives a finer lather, though, and softens the hairs better.

Read on: how to recognise a sustainable safety razor and all stainless steel safety razors compared.

More Posts